Nickel
Cobalt
Tungsten Carbide
COATING CHEMISTRY EMPIRE PRODUCT # HARDNESS & APPLICATIONS
N10Cr2.5B2.5Si
Colmonoy®#4
Metco®12C
N16Cr4B2.5Fe
3Cu3Mo4Si
Colmonoy®#6
Metco®15E
N16Cr4B2.5Fe
3Cu3Mo4Si
Metco®16C
Chromium - 10%
Boron - 2.5%
Iron - 2.5%
Silicon - 2.5%
Nickel - 82.5%
Chromium - 16%
Silicon -4%
Boron - 4%
Iron - 4%
Nickel - 75.75%
Chromium - 16%
Silicon - 4%
Boron - 4%
Copper - 3%
Molybdenum - 6%
Iron - 2.5%
Nickel - 67.5%
EMSWA-00012C
P-ME-00012C
P-ME-00015E
EMSWA-0006
EMSME-00016C
EMSSC-80N60
Rc35.
Softer fused coating which is easily machinable.
Still a good wear & corrosion resistant fused coating at both low & high temperatures to 1550°F.
Rc62.
Hardest fused coating not containing tungsten carbide.
This fused coating is dense, corrosion resistant, & extremely wear resistant.
Rc60.
Fused coating with good resistance to wear by abrasive grains, hard surfaces, particle erosion, fretting, & cavitation at low or high temperatures. Excellent corrosion resistance, Especially good on irregular shapes & where heavy coatings are required.
The following product trademark and registered trademark names are mentioned only for reference purposes. To the best of our knowledge they are marks of the respective owners:
Colmonoy® is a registered trademark of Wall Colmonoy Corp.
Metco® is a register trademark of Oerlikon Metco, Inc.
COATING CHEMISTRY EMPIRE PRODUCT # HARDNESS & APPLICATIONS
N18Cr3B2.5Fe
40Co6Mo3.5Si
Metco®18C
Chromium -18%
Silicon -3.5%
Boron -3%
Iron - 2.5%
Molybdenum - 6%
Nickel - 17%
Cobalt - 40%
EMSME-0018C
Rc56.
This cobalt based fused coating is used as needed especially on 400 series stainless steels without cracking or fracturing.
Good Wear resistance.
The following product trademark and registered trademark names are mentioned only for reference purposes. To the best of our knowledge they are marks of the respective owners:
Metco® is a register trademark of Oerlikon Metco, Inc.
The following product trademark and registered trademark names are mentioned only for reference purposes. To the best of our knowledge they are marks of the respective owners:
Metco® is a register trademark of Oerlikon Metco, Inc.
COATING CHEMISTRY EMPIRE PRODUCT # HARDNESS & APPLICATIONS
Ni35(WC8Ni)
11Cr2.5B2.5Fe
2.5Si0.5C
Metco®36C
Tungsten Carbide-
(Nickel - 8%) - 35%
Chromium - 11%
Boron - 2.5%
Iron - 2.5%
Silicon - 2.5%
Carbon - 0.5%
Nickel - 46%
EMSME-0036C
Rc75.
More wear resistant than any other fused coating.
Recommended for high resistance to abrasive grains, hard surfaces, fretting, & particle erosion, all at temperatures up to 1000°F (540°C).
3755 S. Jason St. Englewood, Colorado 80110 USA
303 762 8744 800 397 8746 Fax: 303 762 8505
sales@empiremetalspray.com empiremetalspray.com
Copyright © 2020 by Empire Metal Spray, Inc.® All Rights Reserved